 |
||
 |
||
 |
||
 |
||
 |
||
 |
||
 |
||
 |
||
 |
||
 |
||
 |
||
 |
||
 |
||
|
|
||
 |
||
|
|
|
|
||
|
|
||
In the past, Motion Engineering sold Redlake cameras. Given this fact, we currently have quite a few customers that still have Redlake MotionScope systems, Redlake PCI systems, and Redlake MotionMeter Systems. Because of our history, we also support these Redlake Systems.
Other systems we support include the Kodak MotionCorder (same as: FASTCAM Super 10K) and the Kodak 4540 (same as: FASTCAM Ultima SE) - both manufactured by Photron.
HIGH-SPEED CAMERA SOFTWARE DOWNLOADS
| Photron FASTCAM Viewer | V 3.2.6.2 32 bit |  |
|
| V 3.2.6.2 64 bit | |
||
| This freely distributable video player is ideal for viewing high-speed imaging files. NOTE: Currently PFV3 supports only the SA-5, SA-1.1, SA-2, SA-3, MH-4, MC-2, APX-RS. Unlike most video viewers, the Photron FASTCAM Viewer enables the user to select the playback rate, step through video one frame at a time, and selectively save video sequences in a variety of compressed and uncompressed formats. This software requires an MMX enabled processor and any Windows operating system. | |||
| Photron FASTCAM Viewer | V 2.4.5.2 | |
|
| This freely distributable video player is ideal for viewing high-speed imaging files. Unlike most video viewers, the Photron FASTCAM Viewer enables the user to select the playback rate, step through video one frame at a time, and selectively save video sequences in a variety of compressed and uncompressed formats. This software requires an MMX enabled processor and any Windows operating system. | |||
| Magma PCI Expansion Unit Drivers | |
||
| Drivers for the PCMCIA based Expansion unit. | |||
| Photron Motion Tools Viewer | V 1.0.5 | |
|
| This freely distributable video player is designed for presenting video with motion analysis. The player itself does not perform any tracking, but it opens all of the data files from a saved Photron Motion Tools project. | |||
| Redlake MotionScope PCI Series Software | V 2.30 | |
|
Redlake MotionScope PCI Software (ver 2.3) - Camera control and driver software for the MotionScope PCI Series high-speed imaging systems. This software requires a Redlake MotionScope PCI high-speed imaging system, Windows NT (SP3 or higher), and an MMX enabled processor. This Software also works with Windows 2000/XP. |
|||
SPECIFIC CAMERA DRIVER DOWNLOADS
| IEEE 1394 cameras | V 1.5.3.0 | |
|
| Drivers for: FASTCAM Ultima SE, FASTCAM Ultima 1024, FASTCAM Ultima 512, FASTCAM APX, Fastcam APX RS. | |||
| Optical Network | V 1.0.0.2 | |
|
| Drivers for: All Photron Gigabit Optical Network enabled cameras (FASTCAM APX, FASTCAM Ultima 512) | |||
| FASTCAM PCI | V 1.10.0.0 | Win98 | |
| WinNT | |
||
| Win200XP | |
||
| Drivers for: Older FASTCAM PCI series | |||
| FASTCAM PCI R2 | V 1.0.0.9 | |
|
| Drivers for: New FASTCAM PCI series | |||
| FASTCAM 1024 PCI | V 1.0.0.0 | |
|
| Drivers for: Fastcam 1024 PCI Series | |||
| FASTCAM 1280 PCI | V 1.0.4.0 | |
|
| Drivers for: FASTCAM 1280 PCI series | |||
| FASTCAM 512 PCI | V 1.0.0.5 | |
|
| Drivers for: FASTCAM 512 PCI series | |||
HIGH-SPEED CAMERA - TECHNICAL MANUALS
